1. Replace and install the saw blade In many cases, when the carbide saw blade was replaced and installed, the staff did not check after installation, resulting in the incorrect installation of the saw blade or not in place of the details, such as loosening phenomenon, the screw is not tighte...
Read MoreComposition of finger cutter The Finger knife is to process the end of wood into fingertip shape, and then splice. There are two kinds of finger cutters in the form: whole finger cutter and single finger cutter. Single finger joint cutter includes single tenon cutter and edge cutter. A single fing...
Read More1. The influence of the inner hole and the outer diameter of the finger cutter on the finger joint. If the tolerance of the inner hole of the finger cutter is out of tolerance, the outer diameter of the finger cutter will be affected. We install a group of finger cutters on the shaft. Because ...
Read MoreWire Flattening Roller is an important working part used to manufacture Flexible Flat Cable (FFC) machines. The materials are high-speed steel and cemented carbide. Its manufacturing accuracy determines the quality of FFC. Therefore, the minimum tolerance of Wire Flattening Roller is controlled at ...
Read MoreWhy do we think titanium alloy is a difficult-to-process material? Because we lack a deep understanding of the processing mechanism and phenomenon of titanium alloys. The cutting force of titanium alloy processing is only slightly higher than that of steel of the same hardness, but the physical ph...
Read MoreIn the previous article “Why is Titanium Alloy a Difficult-To-Process Material?“, we learned that heat is the main reason why titanium alloys are difficult to process. On the basis of understanding the processing mechanism of titanium alloy, plus previous experience, the main process kn...
Read MoreIn the previous article “How to Reduce the Deformation of Aluminum Parts During Processing?“, we learned the process measures to reduce the deformation of aluminum parts during processing. Now we will share the operation skills to reduce the deformation of aluminum parts as follow. Im...
Read MoreWith the increasing use of CNC cutting machines for customized panel furniture, the advantages of its production and processing have become more and more obvious. However, the characteristics of the machine and equipment are not very good, or the operation is improper, just like the traditional ele...
Read MoreWhen you're getting ready to use a saw blade to cut a substrate. You know the diameter of the blade that will fit your saw, and you know the type of saw blade you need to cut your material, but how do you know how many teeth your blade needs to have? More teeth will be better or fewer tee...
Read MoreTurning of slender shafts is a relatively common machining method in machining. The slender shaft refers to the shaft whose length to diameter ratio l / d ≥ 20. When l / d ≥ 100, it is called a slender shaft. Due to the poor rigidity of the slender shaft, the cutting force, the vibration and t...
Read More
All Types of Carbide Inserts to Support Your Project and Business
