Product Information:

Turing insert SNMG. Double-Sided 90° square inserts. 0 degree relief angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid tool holding systems.Provides longer tool life than uncoated grades. Used on a wide range of materials and applications.

Specifications:

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

Application:

Application for turning and milling carbon and alloy steels, tools steel and stainless steel.

FAQ:

How to choose correct turning insert?

Select insert geometry based on selected operation, for example finishing.

Select the largest possible nose angle on the insert for strength and economy.

Select the insert size depending on the depth of cut

Select the largest possible nose radius for insert strength.

What is the difference between face milling and end milling?

These are two of the most prevalent milling operations, each using different types of cutters – the and mill and the face mill. The difference between end milling and face milling is that an end mill uses both the end and the sides of the cutter, whereas face milling is used for horizontal cutting.

Product Information:

16IR Internal thread insert, material: carbide.the insert is 60 degree angle standard metric. Insert purpose is for internal turning. Orientation of insert is right. Internal threading applications in three different geometries: all-round, sharp and a chip breaking C-Geometry.Good wear resistance and edge sharpness..High abrasion performance and pertinence.

Specifications:

• : Recommended Grade

O: Optional Grade

Application

Application for various steel threading operations.The type of carbide grade and the coating on inserts is originally intended for turning steel and stainless steel, but it also performs when turning other alloys.

FAQ:

What is a thread insert called?

A threaded insert that is inserted into an object to add a threaded hole.

How do threaded inserts work in metal?

When the thread inserts for metal.the inserts will create a metal threading point which can be installed and removed many times.

Product Information:

Parting and grooving inserts are inserts for cylinder parting and grooving, including to the outer circular, the inner hole groove, the cutter withdrawal groove, and the end face groove.ERMN insert suitable for parting, grooving, and turning. Easy machining and unobstructed chip flow lead to improved surface quality.Geometry of ERMN cutting insert is shaped for profile turning. Without hole through the insert. Strong cutting edges offer best reliability in hard cutting conditions and long endurance.

Specifications:

• : Recommended Grade

O: Optional Grade

Application:

Recommended for different purposes and applications in parting and grooving .It performs well on turning material steel, stainless steel and cast iron.

FAQ:

What is grooving turning?

Grooving is one type of specific turning operation that cut grooves or forms a narrow cavity of a certain depth on external, internal surfaces, cylinder, cone, or a face of the part.

What are the important factors in parting and grooving?

In parting and grooving, the process security and productivity are two important factors. With the correct setup and choice of tools, many difficulties that can be avoided when parting-off.

Product Information:

EDC-300R0.4 double-ended inserts for parting and grooving with high clamping rigidity. For stable tool life and accuracy.It is a cost-efficient solution for depths in which 2-edged inserts can be used for parting off and external grooving.

Application:

The inserts are mainly used for parting, external grooving, face grooving, internal grooving, profiling and hard part turning.Roughing to finishing.

FAQ:

What is grooving used for?

Grooving or recessing operations, sometimes also called necking operations, are often done on work piece shoulders to ensure the correct fit for mating parts. When a thread is required to run the full length of the part to a shoulder, a groove is usually machined to allow full travel of the nut.

What is face grooving?

When making an axial groove on the face of a component it is important to choose the correct tools. The bending radius of the groove will determine the curve of the tool. Chip evacuation can be a problem in face grooving due to the curved groove.

Product Information:

Parting and grooving inserts are inserts for cylinder parting and grooving, including to the outer circular, the inner hole groove, the cutter withdrawal groove, and the end face groove.The groove shape includes the narrow, wide, and forming groove.MGMN cutting insert is shaped for parting and grooving. Cutting edge shape is straight without hole through insert. Strong cutting edges realize best reliability in hard cutting conditions and long endurance. MGMN is not standard ISO code.

Application:

With our cutting tools for parting and grooving, you get high productivity and long tool life, helping you deliver plenty of components out of the workshop door.Recommended for different purposes and applications in parting and grooving .It performs well on turning material steel, stainless steel and cast iron.

FAQ:

What is the difference between positive and negative inserts?

The difference between Positive and Negative insert lies in their different clearance angle. Which is that :-The Negative insert always have o degree clearance angle. and the Positive inserts always have clearance angle between 1 degree to 90 degree.

What is insert grade?

Different grade use for machining different kinds of material.with multiple types of insert grade in our company which can meet your different requirements.

Product Information:

TNMG Insert is the triangle shape with negative angles to guarantee efficient machining and high stability. For a wide range of materials and machining conditions.Double-sided, for semi-roughing and roughing.

Specifications:

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

Application:

The TNMG Insert is mainly used in the fields of metal turning, milling, cutting and grooving, thread turning, etc. Application for steel material.

FAQ:

What is TNMG insert?

TNMG inserts are ISO turning inserts and most commonly used in almost all CNC Lathes. It is used for Profile Turning applications and general shaft turning applications. Insert is having 6 cutting edges.

What is the difference between face milling and end milling?

These are two of the most prevalent milling operations, each using different types of cutters – the and mill and the face mill. The difference between end milling and face milling is that an end mill uses both the end and the sides of the cutter, whereas face milling is used for horizontal cutting.

Product Information:

This kind of VNMG Insert is made of high quality alloy metal with advanced technology. The surface is treated with CVD coating to extend the cutting life. The unique V shape design with negative angles guarantees efficient machining and high stability. The combination of different chip breakers and grades will help it to deal with different working condition and multiple operations.

In addition, it has the advantages of high hardness, high efficiency, high accuracy, corrosion resistance, long service life, smooth appearance.

We can also provide customized service to meet the requirements of different customers.

Specifications:

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

Application:

The VNMG Insert is mainly used in the fields of small part turning, general turning, metal turning, milling, cutting and grooving, thread turning, etc.

FAQ:

What is the difference between positive and negative inserts?

The difference between Positive and Negative insert lies in they with different clearance angle. The clearance angle of negative insert is o degree . the positive inserts have clearance angle between 1 degree to 90 degree.

Which insert type is the best choice for rough machining?

When you need roughing and general turning .the negative inserts are the first and best option. this type of insert allows deeper depths of cut and higher feed rates due to strong insert shapes and thickness.

Product Information:

High surface finish factor, good abrasion resistance. High precision, new coating technology. Adopt imported technology to process, the overall hardness is stronger, and the service life of the blade is longer.

Specifications:

• : Recommended Grade

O: Optional Grade

Application:

When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge. It is coated, providing much longer tool life than uncoated inserts.

FAQ:

What is the grooving process?

The term grooving usually applies to a process of forming a narrow cavity of a certain depth, on a cylinder, cone, or a face of the part. The groove shape, or at least a significant part of it, will be in the shape of the cutting tool. Grooving tools are also used for a variety of special machining operations.

Product Information:

TNGG insert with negative relief angle, G class, triangular insert, for precision finishing. 6 cutting edges . With 0 degrees clearance angle major (AN).TNGG three sides of equal length that form three cutting points with 60° nose angles. These indexable inserts mount to a compatible toolholder, which attaches to a lathe or CNC turning machine. They can be rotated (indexed) to expose a fresh cutting edge when the old one dulls. They can be replaced with new compatible inserts of the same style or a different style without removing the toolholder from the machine.Indexable turning tools require fewer tool changes than solid tools in high-volume metalworking and fabrication applications with high speeds, high feeds, and difficult-to-machine materials.

Specifications:

• : Recommended Grade

O: Optional Grade

Application:

Application for making longitudinal cuts, turning, facing, and chamfering in light roughing and finishing applications.

FAQ:

What are the types of insert?

Cutting tool inserts.

Cutting insert.

Isostatic mounting.

Thread cutter.

Carbide cutting tool and insert.

Flat bottom drill.

HSS drill inserts.

Positive square inserts.

What is the difference between face milling and end milling?

These are two of the most prevalent milling operations, each using different types of cutters – the and mill and the face mill. The difference between end milling and face milling is that an end mill uses both the end and the sides of the cutter, whereas face milling is used for horizontal cutting.

Product Information:

VBMT turning insert.35° Diamond Shaped Indexable Inserts."V" shaped inserts provide a sharp shape, ideal for finishing to semi-finsihing applications.Negative inserts can provide up to 4 cutting edges.Available in multiple chipbreakers, grades and from different manufacturers.

Shape: 35° Rhombus (V)

Clearance Angle: 5° (B)

Tolerance: Class M (M)

Type: Single-Sided (T)

Application:

Application for finishing to semi-finsihing of steel.

FAQ:

What are face mills?

Face milling is a machining process in which the milling cutting is placed perpendicular to the workpiece. The milling cutting is essentially positioned “face down” towards the top of the workpiece. When engaged, the top of the milling cutting grinds away at the top of the workpiece to remove some of its material.

What is the difference between face milling and end milling?

These are two of the most prevalent milling operations, each using different types of cutters – the and mill and the face mill. The difference between end milling and face milling is that an end mill uses both the end and the sides of the cutter, whereas face milling is used for horizontal cutting.

Product Information:

SCMT 90° Square Shaped Indexable Inserts."S" shaped inserts provide a strong insert shape, great for medium to roughing applications.Negative inserts can provide up to 8 cutting edges.Available in multiple chipbreakers & grades. Positive Insert with Chip breaker.

Shape: Square (S)

Clearance Angle: 7° (C)

Tolerance: Class M (M)

Type: Single-Sided (T)

Chipbreaker: General Purpose

Specifications:

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

Application:

Application for Steel. Stainless Steel machining.

FAQ:

How to choose correct turning insert?

Select insert geometry based on selected operation, for example finishing.

Select the largest possible nose angle on the insert for strength and economy.

Select the insert size depending on the depth of cut

Select the largest possible nose radius for insert strength.

How do you measure carbide inserts?

A two-digit number designates the sizes of these inserts. The first digit indicates the number of eighths of an inch in the width and the second digit indicates the number of fourths of an inch in the length of the insert.

Product Information:

Threading indexable turning inserts with special geometry and rigid mounting in the turning holder, enables turning possibilities of strong and fast production. This tool is highly valued as it is proven in demanding production processes, in long-term use and has upgraded the production process with better results. With its high efficiency, this production-tested threading insert will help extending time between changing periods of your tool and consequently reduce production downtime.

This carbide insert will bring you satisfaction. High temperature resistance and surface coating enables smooth separation of the chip from the work process.

Specifications:

• : Recommended Grade

O: Optional Grade

Application:

It’s useful set of threading carbide tungsten turning inserts. It’s intended for turning steel and stainless steel, but it also performs when turning other alloys.

The special designed chip breaker ensures reliable chip flow, both in case of external and internal threading. The different series of threading inserts can be applied in different fields.

FAQ:

What is a thread insert called?

A threaded insert that is inserted into an object to add a threaded hole.

How do threaded inserts work in metal?

When the thread inserts for metal.the inserts will create a metal threading point which can be installed and removed many times.

Product Information:

Grooving tool is usually a carbide insert mounted in a special tool holder, similar to any other tool. Designs of grooving inserts vary, from a single tip, to an insert with multiple tips. Inserts are manufactured to nominal sizes. Multi tip insert grooving tools are used to decrease costs and increase productivity.First choice for most applications.High resistant against heat and plastic deformation.Large assortment, available in all geometries and widths

Application:

Suitable for parting, grooving, and turning. Easy machining and unobstructed chip flow lead to improved surface quality. It is a universal chip breaker for general machining of steel, stainless steel, and cast iron.

FAQ:

What are the factors are important in parting and grooving?

In parting and grooving, process security and productivity are two important aspects. With the correct setup and choice of tools, there are many difficulties that can be avoided when parting-off.

What are the tools used for grooving?

Grooving tool is usually a carbide insert mounted in a special tool holder, similar to any other tool. Designs of grooving inserts vary, from a single tip, to an insert with multiple tips. Inserts are manufactured to nominal sizes. Multi tip insert grooving tools are used to decrease costs and increase productivity.

Product Information:

CCMT carbide insert is a 80°diamond with a 7° relief. The center hole is a 40°-60° single countersink, and a single-sided chip breaker. It has higher safety and reliability for end face machining under heavy duty interrupted cutting, vibration and unstable conditions, and is an ideal tool for machining work piece surfaces in harsh conditions. In addition, the CCMT has the advantages of high accuracy, wear resistance, corrosion resistance, long service life.

Specifications:

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

Application:

The CCMT is widely applied in cutting and grooving, thread turning, etc. It’s an good ideal choice for roughing.semi-finishing.finishing.general machining of steel. stainless steel and cast iron.

FAQ:

What is tool insert?

Inserts are removable cutting tips, which means they are not brazed or welded to the tool body. They are usually indexable, meaning that they can be exchanged, and often also rotated or flipped, without disturbing the overall geometry of the tool (effective diameter, tool length offset, etc.).

What does indexable tooling mean?

Indexable tools are predominantly made of inserts or tips, where the cutting edge is a replaceable shaped piece which is welded or clamped on to a tool body. These are generally used for turning, milling and hole-making operations.

Product Information:

S-type material semi-finishing

The M-level double-sided chipbreaker adopts double positive rake angle to perfectly combine the sharpness and strength of the insert; the cutting resistance is small, and the wider chipbreaker ensures the space for chip deformation, thereby reducing groove wear.

Specifications:

• : Recommended Grade

O: Optional Grade

Application:

Solid carbide provides better rigidity than high speed steel. It is extremely heat-resistant and used for semi-finishing of super-alloy and Ti-alloy. CNC insert cutting tools cemented carbide hard alloy turning inserts VBET1604 for lathe hardend material machining.

FAQ:

What is a machining insert?

Inserts are removable cutting tips, which means they are not brazed or welded to the tool body. They are usually indexable, meaning that they can be exchanged, and often also rotated or flipped, without disturbing the overall geometry of the tool (effective diameter, tool length offset, etc.).

Product Information:

22ER insert purpose is for external turning. Orientation of insert Right. Thread cutting inserts will bring you satisfaction like it did to other experienced masters of turning business. High wolfram hard metal carbide provides high temperature resistance, at the same time the surface coating enables smooth operation of the chip from the work process. Geometry of inserts in this set is made in special ISO dimensions for precise making of threads in different pitch sizes metric angle.

Specifications:

• : Recommended Grade

O: Optional Grade

Application:

Durability in thread cutting. different turning inserts for different threading sizes. The type of carbide grade and the coating on inserts is originally intended for turning steel and stainless steel, but it also performs when turning other alloys.

FAQ:

What is a thread insert called?

A threaded insert that is inserted into an object to add a threaded hole.

What are thread inserts used for?

A threaded insert is a sleeve with a threaded interior that can accept a bolt or threaded fastener. The insert can have different dimensions, be made of different materials, and come in different configurations or tooling; its design will hold fast in thin or soft materials, making the threaded fastener secure.

Product Information:

VCGT Turning Inserts.V -quadrilateral shape of turnining insert - rhombic (35°)

C - Insert with clearance under main cutting edge (7°)

G - Tolerances and dimensions of carbide turning insert

T- Hole through insert and single sided chipbreaker

VCGT turning insert with very positive flank, positive rake angle and sharp cutting edge for optimum cutting performance. Sharp cutting edge for optimum cutting performance.Carbide construction for strength and rigidity. Heat and wear resistant properties for prolonged tool life.Cutting edges reliability, precision with a smooth surface.Corrosion resistance high brightness

Specifications:

• : Recommended Grade

O: Optional Grade

Application:

The type of carbide grade and the coating on inserts is originally intended for turning aluminum, non ferrous (aluminum alloy, copper, wood, glass fiber, carbon fiber reinforced plastic and other nonferrous metals and alloys)

FAQ:

Where is tungsten carbide manufactured?

There are many company manufacture tungsten carbide.but approximately 85% of the world's tungsten comes from China .Zhuhzou city is the largest tungsten carbide products manufacturing center in Asia.

What are inserts made of?

Almost all the inserts consist of cemented carbide, which results from a combination of tungsten carbide (WC) and cobalt (Co). The hard particles within the insert are WC, while Co can be thought of as the glue that holds the insert together.

What are your main products?

Estool cutting tools company’s main product are turning insert.milling insert.drilling insert.threading inserts.grooving inserts and aluminium machining inserts.

Product Information:

WNMG Turning Inserts 80° Insert double-sided inserts with negative (0°) relief angle, offering a strong edge for general applications and varying depths of cut dependent on chip breaker type across most materials. WNMG Turning Inserts can deal with multiple operations by combining different chip breakers and grades.it’s highly economical choice for your production, since they are made symmetrically, so that when the one cutting edge is worn they can rotate to another edge.

Specifications： 

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

Application:

These WNMG Turning Inserts can deal with multiple operations by combining different chip breakers and grades. Recommended for rough, semi-finishing and finishing of machining most steels, stainless steels, cast irons and super alloys under stable conditions.

FAQ:

What are your main products?

Estool cutting tools company’s main product are turning insert.milling insert.drilling insert.threading inserts.grooving inserts and aluminium machining inserts.

How long do carbide inserts last?

Carbide lathe tools are stronger than high-speed steel tools, you can rotate the cutting edge to make them last longer.

Product Information:

TCMT carbide insert is a 60°triangle with a 7°relief. The center hole is a 40°-60° single countersink, and there is a single-sided chip breaker. It has an inscribed circle (IC) of 0.25" (1/4"), a thickness of 0.094" (3/32"), and a corner (nose) radius of 0.0156" (1/64").

Specifications:

• : Recommended Grade

O: Optional Grade

• : Recommended Grade

O: Optional Grade

Application:

TCMT Triangle Insert with Hole. Screw-On Insert. 7 degree relief angle. Single Sided Insert with GM/GF-Medium Chip breaker for semi-finishing and finishing in a variety of materials and applications.

FAQ:

What is negative and positive insert?

A negative insert has an angle of 90° (0° clearance angle), while a positive insert has an angle of less than 90° (for example, 7° clearance angle). The illustration of the negative style insert, shows how the insert is assembled and tilted in the holder.

What is DNMG insert?

DNMG inserts are diamond or “D” shaped turning inserts with a 55-degree angle. They're a versatile cutting tool used for grooving, profiling, finishing, and other machining applications. Our DNMG inserts are all manufactured by Walter – a well-known producer of quality and precision cutting tools.

Product Information:

For the processing of steel. Better smoothness.

Products made in China. Full fine grinding of the surface of the surrounding surface with a sharp edge. The cutting is more relaxed. Higher durability.

Specifications:

• : Recommended Grade

O: Optional Grade

Application:

Made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance. For rough turning steels, tools steel and stainless steel.

FAQ: