Home › Carbide Inserts News
A few days ago, the Swiss Machinery Association selected Zhuzhou for the first event of the national roadshow, and held a “Zhuzhou Cemented Carbide Industry Processing and Equipment use technology seminar”. According to the rough statistics of the Municipal Cemented Carbide Industry As...
Read MoreCemented carbide non-standard tools are used as industrial teeth, using one or more refractory metal carbides (WC, TiC, etc.) as the hard phase, transition metal (Co, etc.) as the bonding phase, and powder metallurgy Technology to produce multi-phase materials. As a non-standard tool for cutting c...
Read MoreWoodworking multi-blade saw blades with scraper blades, high cutting precision, neat cutting joints, smooth cutting surface, small cutting noise, no deformation of the matrix, long cutting life. Saw blade ultra-thin saw the road, high use of wood, sawdust amount is small, can play th...
Read More1. Replace and install the saw blade In many cases, when the carbide saw blade was replaced and installed, the staff did not check after installation, resulting in the incorrect installation of the saw blade or not in place of the details, such as loosening phenomenon, the screw is not tighte...
Read MoreComposition of finger cutter The Finger knife is to process the end of wood into fingertip shape, and then splice. There are two kinds of finger cutters in the form: whole finger cutter and single finger cutter. Single finger joint cutter includes single tenon cutter and edge cutter. A single fing...
Read More1. The influence of the inner hole and the outer diameter of the finger cutter on the finger joint. If the tolerance of the inner hole of the finger cutter is out of tolerance, the outer diameter of the finger cutter will be affected. We install a group of finger cutters on the shaft. Because ...
Read MoreWire Flattening Roller is an important working part used to manufacture Flexible Flat Cable (FFC) machines. The materials are high-speed steel and cemented carbide. Its manufacturing accuracy determines the quality of FFC. Therefore, the minimum tolerance of Wire Flattening Roller is controlled at ...
Read MoreWhy do we think titanium alloy is a difficult-to-process material? Because we lack a deep understanding of the processing mechanism and phenomenon of titanium alloys. The cutting force of titanium alloy processing is only slightly higher than that of steel of the same hardness, but the physical ph...
Read MoreIn the previous article “Why is Titanium Alloy a Difficult-To-Process Material?“, we learned that heat is the main reason why titanium alloys are difficult to process. On the basis of understanding the processing mechanism of titanium alloy, plus previous experience, the main process kn...
Read MoreIn the previous article “How to Reduce the Deformation of Aluminum Parts During Processing?“, we learned the process measures to reduce the deformation of aluminum parts during processing. Now we will share the operation skills to reduce the deformation of aluminum parts as follow. Im...
Read More