Home › Carbide Inserts News
At present, because labor is cheap in China, and the cost of installing and changing woodworking knives is not high, cemented carbide is still mainstream at present. Compared with other materials, this kind of material is already bulky and very common. Therefore, the price of the finished woodwo...
Read MoreFor a long time, people have been pursuing CNC insert with better wear resistance and longer tool life. Most of foreign well-known CNC tools brands can meet this demand. Of course Chinese Metal cutting tools are not willing to lag behind. In the past few months, most of our customers are obsessed ...
Read MoreIt's awful that our CNC turning insert got chips wrapped around it. Our tool's going to worn out prematurely. Or worse that it could break. Today I will share these ten tips and learn to process easily! External turning When turning the outer circle of the blank, the starting point should be turn...
Read MoreIn the field of mold manufacturing , hard materials are widely used. Since they have high hardness of HRC55-65, there usually not take traditional cutting methods, considering the low working efficiency and costly production. The features of high speed milling. High-speed milling technology pr...
Read MoreTraditional ordinary tools (such as flat cutter heads) have poor heat dissipation efficiency during use, and the woodworking tools are easy to wear and deform, resulting in poor wood processing results. With the progress of the times, a more efficient cutting tool appeared-spiral cut...
Read MoreFrom the daily processing point of view, the carbide tip of the single-blade saw blade itself is the most prone to damage. More serious, there will be direct breakage of saw blade serrations. Taking the heat treatment processing of the saw blade base steel as an example, an unqualified heat ...
Read MoreFor aluminum plate cutting, it is recommended to use a single-edged special router bit. No sticking to the knife during processing, fast speed, and high efficiency. Cork, MDF, virgin wood, PVC, acrylic large-scale deep relief processing, the single-edged spiral ball-end woodworking router bits is ...
Read MoreToday’s nails are typically made of steel, often dipped or coated to prevent corrosion in harsh conditions or to improve adhesion. Ordinary nails for wood are usually of a soft, low-carbon or “mild” steel (about 0.1% carbon, the rest iron and perhaps a trace of silicon or manganes...
Read MoreABSTRACT Ti (C, N) -based cermets with different Nbc contents (0% 、3% 、6% 、9% 、12% ) were prepared by powder metallurgy method, and then the TiAlCrSiN coating was coated on the surface of the prepared cermet matrix by physical vapor deposition (PVD). The microstructure of the cermets coated with ...
Read MoreMetal processing is inseparable from the inserts. A high-quality insert must have these characteristics: High wear resistance Long tool service life High metal removal rate High reliability Even under severe conditions (such as complex cutting and deep cavity), dry cutting or wet cutting m...
Read More
All Types of Carbide Inserts to Support Your Project and Business
